CONTENTS Important safety advice and precautions.........3 Presentation ..................7 Installation ...................8 Unpacking ....................8 Fitting ....................8 Connection ..................10 Use ..................... 11 Control panel glossary ................ 11 Choice of cookware ................12 Cooking zone selection ..............12 Powering On / Off ................12 Power setting ..................12 Horizone .....................13 Setting the timer .................13 Locking the controls................13...
IMPORTANT SAFETY ADVICE AND PRECAUTIONS This user guide is also available on the brand's web site. Please read these instructions before installing and using your appliance. They have been written for your safety and the safety of others. Keep this user guide with your appliance.
Page 5
IMPORTANT SAFETY ADVICE AND PRECAUTIONS glass worktop very the pacemaker must be sturdy; however, it is not designed and programmed unbreakable. in compliance with the Do not place any hot lids regulations that apply flat on your cooking hob. A to it.
Page 6
IMPORTANT SAFETY ADVICE AND PRECAUTIONS WARNING: Only use hob installation regulations. A disconnection device must protectors designed be incorporated into the the manufacturer of the fixed wiring. cooking appliance or listed power cable as suitable in the user damaged, should guide, or included with replaced the appliance.
Page 7
- The sensor is not designed to go in an oven. We, Brandt France, declare that the appliance equipped with the Perfect Sensor complies to directive 2014/53/EU. The full EU declaration of compliance is available on the following website: www.dedietrich- electromenager.com.
Thanks to the De Dietrich Perfect Sensor hob with its connected temperature sensor, you can perform every culinary gesture expertly and accurately, cook all meats and fish according to your tastes and succeed in your preparations, by adjusting the core temperature of your preparations.
1.1 UNPACKING Remove all the protective elements from the hob, the sensor and the sensor stand. Your sensor is delivered with a battery that you have to install (1.0). To insert the battery, unscrew the cover on the back of the sensor using a coin. Insert the battery following the polarity (+ upwards), then screw the cover back on.
Page 10
- Fitting flush with the worktop diagram (1.2.3) Check that air can flow correctly between the front and back of your hob. If you are installing the hob above a drawer (1.2.6) or above a built-in oven (1.2.7), comply with the dimensions provided on the illustrations to ensure a sufficient air outlet at the front.
1. 3 ELECTRICAL CONNECTIONS This hob must be connected to the mains via an all-pole cut-off device that complies with current installation regulations. A disconnection device must be incorporated into the fixed wiring. Identify the type of cable of your hob according to the number of wires and colours: - 5-wire cable (1.3.1):...
• power distribution, so as not to exceed 2.1 CHOICE OF COOKWARE its total power. Most cookware is compatible with induction. Only glass, terracotta, 2.3 SWITCHING ON/OFF aluminium without a special base, copper and some non-magnetic stainless steels Press the On/Off touchkey .
• o stop the timer during cooking, press the + and - keys or return to 0 using the - key. tech Horizone 2.5 HORIZONE Independent timer The free zone is selected with touchkey With this function, you can time an event without cooking.
• After a predefined time, the lock will Locking automatically disengage. Two beeps Press and hold the key until the sound and "bloc" switches off. You can "bloc" locking symbol appears in the s t o p t h e C l e a n displays and a short beep confirms the Lock at any moment by pressing and...
• 2.9 PERFECT SENSOR FUNCTION 3 - Give a short press on ; the hob gives a confirmation beep; flashes to confirm the pairing. sensor flashes blue (this step may take There are three ways of using the up to 15 seconds). function - View the temperature measured in the the sensor is not designed to go...
Page 17
• Using the sensor For all functions, except the melting function: To operate the sensor, you need - the sensor must be at least 1 cm from to switch it on (press the button for the base of the pan. several seconds);...
Page 18
• Expert mode Warm This function allows you to cook food This function allows you to warm food by directly selecting the required at a temperature that can be adjusted + / - between 65 and 80°C. The setpoint temperature using the keys .
Page 19
• Technical information regarding the Warning: sensor: - You can programme a time in sensor Parameter Specifications Notes mode. In this case, the time is displayed Voltage 2.5 - 3V CR2032 battery alternately with the temperature. - The sensor can only be used on one Autonomy with new battery 300 hours...
• Cooking instructions: Basic ingredient or Function Quantity (g) Temperature (°C) Time Tips dish White meat 150g chicken fillets 80°C 8 to 12 min Flatten the breasts (1/1.5 cm high) 30s to 2 min/side Leave the meat to rest for 5 min (depending on 150 to 200g 35 to 45°C (blue)
Page 21
• Cooking instructions: Basic ingredient or Function Quantity (g) Temperature (°C) Time Tips dish Adjust the cooking container 2 hours 30 to 3 to the quantity to cook. Add Stew 1000 - 4000 70 - 80 hours the peeled potatoes before the last 1/2 hour of cooking Adjust the cooking container Veal blanquette...
• "Auto-Stop" system 2.10 SAFETY PRECAUTIONS AND If you forget to switch off a pan, your RECOMMENDATIONS hob has an “Auto-Stop” safety function that automatically switches off the Residual heat forgotten cooking zone after a pre-set After intensive use, the cooking area you time (between 1 and 10 hours based on have just used will remain hot for several the power level setting).
• CARE Looking after the sensor Looking after the hob - Clean the sensor before using for the For light soiling, use a kitchen sponge. first time Use hot water to wet the area to be - Only use neutral products, no abrasive cleaned and then wipe dry.
• PROBLEMS Code F7 is displayed. When using for the first time T h e e l e c t r o n i c c i r c u i t s h a v e Yo u n ot i ce t ha t s om ething overheated...
• PROBLEMS The sensor flashes red: - Before switching off if the battery is too weak. event loss communication, flashes and then green depending on whether connection with the hob is restored or not. • ENVIRONMENT ENVIRONMENTAL COMPLIANCE Contact your local authority or retailer for information on used appliance collection The packaging material of this appliance points close to your home.
• CUSTOMER SERVICE SERVICING AND REPAIRS FRANCE Any repairs to your appliance must be made by a qualified professional accredited to work on the brand. When calling, please provide the full references of your appliance (commercial reference, service reference, serial number), so that we can handle your call more efficiently.
Need help?
Do you have a question about the DPI7570XT and is the answer not in the manual?
Questions and answers