Silvercrest SRH 5 C3 Operating Instructions And Safety Instructions page 22

♦ Press the VOLUME |
to start the automatic station scan . The progress of the scan is shown as a
progress bar and the number of stations found is shown on the display
The FM radio stations found are automatically stored in the station list on
order of increasing frequency . When the scan is finished, the first station in
the station list is automatically played .
NOTE
► An automatic station scan with station saving may overwrite an existing
station list .
Selecting stations
♦ Briefly press the TUNE+
station from the station list .
♦ Press the VOLUME |
Manual station scan
♦ Briefly press the VOLUME |
next receivable station in ascending order .
NOTE
► The frequency of the station is shown on the display
is switched off during station scan .
Manual station selection
♦ Press the TUNE+
the FM frequency in 0 .05 MHz increments . The current FM frequency is
shown on the display
SRH 5 C3
ENTER / SCAN dial
button 7
or TUNE−
8
ENTER / SCAN dial
ENTER / SCAN dial
or TUNE− button for about 2 seconds to change
8 7
.
1
for approx . 2 seconds
6
to select an FM radio
to confirm the selection .
6
to switch to the
6
and the speaker
1 9
GB │ IE │ NI 19
│
.
1
■