Silvercrest SRH 5 C3 Operating Instructions And Safety Instructions page 23

Scan setting
The Scan setting function allows you to set whether all receivable FM radio
stations should be found during a scan or only radio stations with a strong
reception signal .
♦ In FM radio mode, press the INFO / MENU button
2 seconds . The following appears on the display Scan setting .
♦ Press the VOLUME |
♦ Press the TUNE+
ENTER / SCAN dial
♦ Press the VOLUME |
Saving your favourite stations
♦ To store the current radio station manually, press the PRESET
approx . 2 seconds . The display
radio station (if radio stations have already been stored) . If no radio stations
have yet been stored, the display
♦ Briefly press the TUNE+
or turn the VOLUME |
preset .
♦ Press the VOLUME |
the selected preset . The display
NOTE
► Stored radio stations are overwritten if you store other stations in station
presets that are already occupied .
■ 20 GB │ IE │ NI
│
ENTER / SCAN dial
or TUNE− button or turn the VOLUME |
8 7
to select Strong stations only or All stations .
6
ENTER / SCAN dial
shows the preset with the last selected
1
shows Store preset 1: (Empty) .
1
or TUNE−
8 7
ENTER / SCAN dial
ENTER / SCAN dial
shows Preset (1-40) stored .
1
for approx .
4
to confirm the selection .
6
to confirm the selection .
6
button 5
button (several times if necessary)
to select the desired
6
to store the station in
6
for
SRH 5 C3