Yamaha WOLUERINE RMAX Owner's Manual page 138

Table of Contents

Advertisement

Tightening torque:
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
Changing the final gear oil
1. Park the vehicle on a level surface.
2. Place an oil pan under the final gear case
to collect the used oil.
3. Remove the final gear oil filler bolt, the fi-
nal gear oil drain bolt and their gasket to
drain the oil.
9
1. Final gear oil drain bolt
2. Gasket
4. Install the drain bolt and its new gasket,
Tightening torque:
5. Refill with the recommended final gear oil
6. Check the oil filler bolt gasket for dam-
7. Install the oil filler bolt and its gasket, and
2
1
Tightening torque:
8. Check for oil leakage. If oil leakage is
9-25
and then tighten the bolt to the specified
torque.
Final gear oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
up to the brim of the filler hole.
age, and replace it if necessary.
then tighten the bolt to the specified
torque.
Final gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
found, check for the cause.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yxf10wpzmYxf10wpam

Table of Contents