Table of Contents
Advertisement
1
No.
Name
4
Keypad
5
C (Clear)
6
Reset
7
Stop
8
Start
9
Register Key 1 to Regis-
ter Key 3
10
Power key
11
Status Indicator
d
Reference
If necessary, you can adjust the angle of the Control Panel to make it easier use. For details on the adjust-
ment, refer to [User's Guide: Accessibility].
1-4
Description
Use this keypad to enter numeric values such as the number of
copies or zoom ratio. This keypad is also used to select a num-
bered setting key.
Press this key to clear all numeric values, for example, the number
of copies, zoom ratio, and size that you entered using the Keypad.
Press this key to reset the settings you entered or changed on the
Control Panel.
Press this key to temporarily stop an active copy, scan, or print job.
•
To restart, press the Start key.
•
To delete, select a target job in the currently stopped screen,
then press [Delete].
Press this key to start an operation such as copying, scanning, fax-
ing, or printing.
•
Lights up blue: This machine is ready to start operating.
•
Lights up orange: This machine is not ready to start operating.
If this indicator lamp lights up orange, check whether any warning
or message is displayed on the Touch Panel.
Press each key to switch the display of the Touch Panel to a func-
tion assigned to a Register key.
•
By default, the Register keys are assigned as follows. Register
Key 1: [Scan/Fax], Register Key 2: [Copy], Register Key 3: [10
Keypad]
•
A function to be assigned to a Register key can be changed to
suit your environment. For details, refer to page 4-3.
Press this key to switch this machine to Power Save mode.
•
If the Power key is pressed while this machine is active, the sub
power is turned off to reduce power consumption. While the
sub power is turned off, this machine can receive data or faxes,
however, it cannot scan or print an original.
•
If the Power key is held down while this machine is operating,
Power Save mode shifts to the ErP Auto Power Off mode (close
to Main Power Off mode), which offers a higher power saving
effect than Sub Power Off mode. In ErP Auto Power Off mode,
this machine cannot receive data or faxes, and also it cannot
scan or print an original.
•
The Power key can also be used as a power save key to switch
to Power Save mode. For details on how to use the Power key,
refer to page 5-3.
Indicates the status of this machine by the lamp color, flashing, or
a lamp lighting up.
•
Flash in orange: Warning
•
Lights up orange: The machine has stopped.
d-Color MF552/452/362/282/222
Advertisement
Table of Contents
