Summary of Contents for ICP DAS USA ET-7000-UT Series
Page 1
PET-7000/ET-7000 Quick Start V1.4, March 2018 Supported Products ET-7000 Series PET-7000 Series ET-7000-UT Series Technical Support PET-7000 / ET-7000 User Manual http://ftp.icpdas.com/pub/cd/6000cd/napdos/et7000_et7200/document/ What’s in the Box? PET-7000/ET-7000 Module Plastic Rail Quick Start Factory Default Settings Network Default...
Page 2
Connecting to Network, Computer and Power Non-PoE Power Supply Switch +10 ~ 30 V for ET-7000 +12 ~ 48 V for PET-7000 PoE Switch +12 ~ 48 V Power Supply Assigning a Valid IP Address - Method 1 1) Install eSearch from http://ftp.icpdas.com/pub/cd/6000cd/napdos/software/esearch/ 2) Launch eSearch and click “Search Server”...
Page 3
3) Double-click the name for your module on the list 4) Enter the network configuration and click “OK” 5) Repeat Step 2. to search the module again To make sure your modifications take effect. Assigning a Valid IP Address - Method 2 1) Set the IP configuration on your computer The ET-7000 module comes with the default IP address of 192.168.255.1, you must chose an IP address for the computer in...
Page 4
3) Fill out the User name and Password Fill out the factory default user name and password “Admin” and then click “OK”. 4) Assign a valid IP address for your ET-7000 module 1. Click “Configuration” 2. Click “Network Settings” in the sub-menu 3.