EVGA H370 Stinger User Manual page 109

EVGA H370 Stinger (111-CS-E371)
B. To flash from within the H370 Stinger BIOS:
a. Download the latest motherboard BIOS, and unzip the file to your desktop.
b. Drag the unzipped folder into your USB flash drive.
c. Reboot the motherboard. When the H370 Stinger splash screen appears, tap
the Delete key to enter the BIOS.
d. Once inside the BIOS, navigate to the Save & Exit tab.
e. Navigate to the BIOS Firmware Update option, and click "Select BIOS File."
f. Navigate to the folder containing the BIOS
files. Select the correct .bin file from the
dropdown list.
g. After selecting the file, confirm that you wish
to update the motherboard BIOS.
h. After confirming the download, you'll see an
indication that the BIOS is updating.
DO NOT POWER OFF THE MOTHERBOARD WHILE THE BIOS IS
UPDATING.
i. Once the update is finished, the motherboard will power off. Power on the
motherboard and enter the BIOS, using the method described above. Confirm
that the BIOS has been updated to the latest version by checking the BIOS
version (located in the bottom-right of the screen) with the BIOS version you
downloaded.
Note: Your USB flash drive must be formatted as FAT32, or this method of flashing
the BIOS will not work. The USB flash drive included with your motherboard is
already properly formatted to FAT32. If you plan to use your own USB flash
drive, however, please make sure the file system is correct before attempting
this method.
- 109 -