Follett Horizon Elite HC-1810R/N Operation And Service Manual page 22

6. Remove gear motor bolts (9/16" wrench).
7. Remove gear motor and wipe auger shaft clean.
8. Remove main housing insulation and shuttle
insulation:
9. Remove front feed water tube from push-in fitting,
shuttle drain tube, and shuttle switch.
22
Fig. 14
Fig. 15
Fig. 16
HC_1810R/N, HC_2110R/N, HM_1810R/N, HM_2110R/N
WIPE
AUGER
SHAFT