Output High/Low Level; Output Duration - Newland FM510 Series User Manual

Enter Setup

Output High/Low Level

Output High Level

Output Duration

This parameter sets the level output duration after a successful or failed decode.
Set the Output Duration to 500ms:
1. Scan the Enter Setup barcode.
2. Scan the Output Duration barcode.
Scan the numeric barcodes "5", "0" and "0" from the "Digit Barcodes" section in Appendix.
3.
Scan the Save barcode from the "Save/Cancel Barcodes" section in Appendix.
4.
5. Scan the Exit Setup barcode.
** Exit Setup
Output Duration
Output Low Level
50