Cleaning And Care - Silvercrest PD-8871 Operation And Safety Notes

Problem
The product
is not cooling
sufficiently.
The product
is very loud.
Error code E0 The room temperature
Error code E2 The water tank is full.

Cleaning and care

RISK OF ELECTRIC SHOCK!
Improper handling of the product
may result in electric shock.
Always switch the product off
and unplug the mains plug
from the socket before cleaning
the product.
ATTENTION! RISK OF
SHORT CIRCUIT! Water or
other liquids inside the housing
may cause a short circuit.
44 GB/IE
Possible cause
Doors and windows are
not closed properly.
There are heat sources in
the room.
The hot air outlet hose
not connected or blocked.
The temperature setting is
too high.
The air inlets ,
5
blocked.
The product is standing on
uneven ground.
sensor is defective.
10
Solution
Close doors and windows.
Remove all heat sources
if possible.
Connect the hot air outlet
is
13
hose
Adjust the temperature
setting.
are
Clean the air inlets
9
Place the product on as
level and flat a surface
as possible.
Contact customer service.
Empty the water tank.
Never immerse the product in
water or other liquids.
Do not allow water or other
liquids to enter the housing.
ATTENTION! RISK OF
DAMAGE! Improper use of the
product may result in damage to
the product.
Do not use aggressive cleaning
agents, brushes with metal or
nylon bristles, or sharp or metal
objects such as knifes, hard spat-
ulas, etc. These can damage the
surfaces.
or clean it.
13
,
5
.
9