Attaching The Window Sealing; Dismantling The Product; Inserting / Replacing Batteries In The Remote Control - Silvercrest PD-8871 Operation And Safety Notes

Screw the hose connection (win-
dow) and the hose connection
14
(air conditioner)
end of the hot air outlet hose
(see fig. D). To do this, pull the
ends of the hot air outlet hose
apart.
Push the hose connection (air
conditioner) into the rail pro-
15
vided on the back air outlet
(see fig. E).
Attaching the window
sealing
Clean the windows and window
frames with soap or a cleaning
agent and ensure that the
whole window frame is free
from dust and grease.
Cut the hook and loop fastener
with scissors to the dimensions
12b
of the window and attach it
around the window on the whole
window frame (see Fig. F).
Note: Do not attach the hook
and loop fastener
glass (see Fig. G).
Secure the window fabric
the hook and loop fastener
Start with the narrow part and
work from the middle to the rest
of the hook and loop fastener
, which is attached to the
12b
window frame (see Fig. H).
each to one
15
13
13
7
to the
12b
to
12a
.
12b
Tip: It may be helpful to open
the window in order to attach
the window fabric
to leave enough space in the
corners to prevent the window
sealing getting stuck.
Open the zip on the window
fabric by approx. 50 cm.
12a
Insert the hot air outlet hose
of the air conditioner unit into
the opening. Then close the zip
again so that the hot air outlet
hose is securely positioned
13
(see Fig. I).

Dismantling the product

To disassemble the product, re-
peat the process in the reverse
order.
Note: Drain the water tank as
described in the chapter "Drain-
ing the water tank".
Inserting / replacing
batteries in the remote
control
Open the battery compartment
cover on the back of the re-
29
mote control
11
Remove any used batteries from
the battery compartment.
Insert 2 AAA (LR03) type batter-
ies into the battery compart-
28
ment. Make sure that the polarity
. Be sure
12a
13
(see fig. L).
GB/IE 39