Advertisement
Introduction
The FWTM Lite trainer module is an alternative option for pilots who do not have the radio with the PARA trainer
system but still expect to use the trainer system remotely. Power the trainer module by attaching it to the radio
module bay, now the student radio can bind the trainer module in ACCST or ACCESS mode and work at low
latency, so a simple wireless trainer system build is completed very quickly. By plugging an Audio type trainer
cable into the trainer module, this module system also provides a wired way to create wireless connections
between master and student radios.
Overview
Specifications
● Frequency: 2.4GHz
● Dimension: 62.4*30*14.5mm (L*W*H)
● Weight: 18.5g
● Operating Voltage Range: 6.5-8.4V
● Operating Current: 15mA@7.4V
● Compatible with Lite Type Module Bay
Features
● Wireless Trainer Control with Low Latency
● Supports wireless connection to student radio with FWTM Lite module attached on master radio via audio port.
● Smart-Matched ACCESS & ACCST D16 Modes
LED State
ACCESS
Green LED
On
Flash
On
On
On
Off
FrSky Electronic Co., Ltd.
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: sales4tech@gmail.com
Instruction Manual for FrSky FWTM Lite Module
14.5mm
Blue LED (Lite TYPE)
On
Flash
On
Off
Off
On
www.frsky-rc.com
30mm
Contact us : frsky@frsky-rc.com
Status
Register
Register successfully
Bind
Bind successfully
Working normally
Failsafe
Advertisement
Table of Contents
Related Manuals for FrSky FWTM
Summary of Contents for FrSky FWTM
- Page 1 Introduction The FWTM Lite trainer module is an alternative option for pilots who do not have the radio with the PARA trainer system but still expect to use the trainer system remotely. Power the trainer module by attaching it to the radio module bay, now the student radio can bind the trainer module in ACCST or ACCESS mode and work at low latency, so a simple wireless trainer system build is completed very quickly.
- Page 2 Instruction Manual for FrSky FWTM Lite Module ACCST D16 Green LED Blue LED (Lite TYPE) Status Bind Flash Bind successfully Working normally Disconnect Operation steps ACCESS Mode: 1. Set the master radio/trainer module to [Reg] mode. 1.1 Turn on the student radio and navigate to Menu-Model Setup-Page 2. Choose Internal or External RF and select [Reg].
- Page 3 1. Press and hold the binding button on the FWTM module while turning on the master radio. Release the button. The blue LED on the FWTM module will flash, and the green LED will light up, indicating that the trainer module is ready to be bound with the student radio.
- Page 4 2. Please change the trainer mode of the radio used for binding with the module to Master/Jack. FrSky is continuously adding features and improvements to our products. To get the most from your product, please check the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals FrSky Electronic Co., Ltd.
Need help?
Do you have a question about the FWTM and is the answer not in the manual?
Questions and answers