Table of Contents
Advertisement
Hardware Usage Guide
HOW TO USE A HIDDEN CAM & LONG DOWEL
Long Dowel
Arrow
Small end
Hidden Cam
3.
Caution
Risk of damage or
injury. HIDDEN CAMS
must be completely
tightened. HIDDEN
CAMS that are not
completely tightened
may loosen, and parts
may separate. To
completely tighten:
Step 1
å
Assemble your unit on a carpeted floor or on
the empty carton to avoid scratching your unit
or the floor. Save some packing material for
support to be used later in assembly.
å
Push six HIDDEN CAMS (1F) into the
MODESTY PANEL (G).
Pro Tip: You will need
someone's help later
in assembly.
www.sauder.com/commercial-office/service
1.
Push a HIDDEN CAM into the
part. The arrow in the HIDDEN
CAM must point toward the
hole in the edge of the board.
Start
Arrow
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
Tighten
Maximum
210 degrees
Minimum
190 degrees
G
unit number
2.
Insert the small end
of the LONG DOWEL
into the HIDDEN CAM.
Hole
Arrow
1
Arrow
1F
1F
Arrow
Page 7
Advertisement
Table of Contents
