Sauder worksense PALO ALTO 427795 Manual page 13

Step 7
å
With your hands, separate the LOCK MECHANISM SETS (193M). Be careful
of any sharp edges after separating each set.
å
Fasten the LOCK MECHANISM SETS (193M) to the TOP (F) exactly as
shown. Use four BLACK 15/16" SHOULDER SCREWS (144S).
å
NOTE: Be sure the post on the bottom surface of the LOCK MECHANISM
SET inserts into the hole in the TOP.
å
NOTE: The handle should face toward the back edge of the TOP.
å
NOTE: The SHOULDER SCREW will allow the LOCK MECHANISM to swivel.
Handle
193M
www.sauder.com/commercial-office/service
Post
BLACK 15/16" SHOULDER SCREW
Back edge
Post
F
unit number
144S
(4 used in this step)
193M
Handle
Page 13