Sauder worksense PALO ALTO 427795 Manual page 17

Step 11
å
Fasten the PENCIL DRAWER BOTTOM (J) to the DRAWER SIDES (M).
Use four SILVER 1-5/8" FLAT HEAD SCREWS (152S).
å
Fasten the PENCIL DRAWER BOTTOM (J) to the DRAWER BACK (O).
Use four BLACK 1" FLAT HEAD SCREWS (133S).
å
NOTE: There are no pre-drilled holes in the long edge of the DRAWER
BACK (O). Use firm pressure for the SCREWS (133S).
152S
M
www.sauder.com/commercial-office/service
NOTE: Be sure to separate the
BLACK SCREWS (133S) from
the BROWN SCREWS (18S).
J
O
BLACK 1" FLAT HEAD SCREW
(4 used for the DRAWER BACK)
SILVER 1-5/8" FLAT HEAD SCREW
(4 used for the DRAWER SIDES)
M
unit number
133S
152S
Page 17