ICON NTL11215.0 User Manual page 23

HOW TO SET UP THE CONSOLE
Before using the treadmill for the first time, set up the
console.
1. Connect to your wireless network.
Note: In order to access the Internet, download
iFit workouts, and use several other features of
the console, you must be connected to a wireless
network. See HOW TO USE THE WIRELESS
NETWORK MODE on page 33 to connect the
console to your wireless network.
2. Check for firmware updates.
First, see step 1 on page 30 and step 2 on page
32 and select the maintenance mode. Then, see
step 3 on page 32 and check for firmware updates.
3. Calibrate the incline system.
See step 4 on page 33 and calibrate the incline
system of the treadmill.
4. Create an iFit account.
Touch the globe button near the lower-left corner of
the screen and touch the iFit button.
Note: For information about navigating in the
browser, see page 32. The browser will open to
the iFit.com home page. Follow the prompts on the
website to sign up for your iFit membership.
The console is now ready for you to begin working out.
The following pages explain the various workouts and
other features that the console offers.
To use the manual mode, see page 24. To use an
onboard workout, see page 26. To use a set-a-goal
workout, see page 27. To use a pulse workout, see
page 28. To use an iFit workout, see page 29.
To use the equipment settings mode, see page
30. To use the sound system, see page 31. To
use the Internet browser, see page 32. To use
the maintenance mode, see page 32. To use the
wireless network mode, see page 33. To use the
tablet holder, see page 34.
IMPORTANT: If there are sheets of plastic on the
console, remove the plastic. To prevent damage
to the walking platform, wear clean athletic shoes
while using the treadmill. The first time you use
the treadmill, observe the alignment of the walking
belt, and center the walking belt if necessary (see
page 37).
23