5. Select Microsoft from the Manufacturers list.
6. Select TCP/IP Protocol from the Network Protocols list.
7. Specify an IP address, Subnet Mask, and Gateway a
address automatically", if a DHC
8. Restart the computer.
9. Done.
Note: Using TCP/IP protocol to access the print
settings. If you are not familiar with these settings, please consult your network
administrator for details or ask for help.
IPX/SPX-compatible Protocol Installation
1. Click Sta
rt, point to Settings, and select Control Panel.
2
. Double c
lick the Network icon.
3. If the IPX/SPX-compatible Protocol is not already installed, click Add.
4. Se
lect Protocol and click Add.
5
. Select Microsoft from the Manufacturers list.
6. Select IPX/SPX-compatible Protocol from the
instructions on the screen.
7. Restart the computer.
8. Done.
NetBEUI Protocol Installation
1. Click Start, point to Setting , and select
2. Double click the Network
3. If the Ne
tBEUI is not already installed, click Add.
4
. Select Protocol and click Add.
5. Select Microsoft from the Manufacturers list.
P server is available on the LAN.
s
Control Panel.
icon.
49
ddress or specific "Obtain IP
server requires well-configured TCP/IP
Network Protocols list and follow the