TP-Link TL-PS110P User Manual page 46

snmp.snmpEnableAuthenTraps
Users can set up print server's SNMP functions by using their browsers.
1.Click Setup, it then appe
2 .Click SNMP, it then as shown in the following picture.
SNMP Community: The print server supports up to two community names. The default
Support HP WebJetAdmin: This option allows user determine to disable/enable the
SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message
the netw
not corr
SMB Setup
Enables or disables the function of sending SNMP A
Failure trap message to the network administrator, if the
community name within a SNMP request
ars the sub-menu.
community name is public (case-sensitive), with Read Only access
right in default.
Support HP WebJetAdmin.
ork administrator, if the community name within a SNMP request is
ect.
46
uthentication
is not correct.
to