Table of Contents
Advertisement
Quick Links
Before you start, you should prepare the following items
Windows 2000/XP/2003/Vista computer with print server setup CD
USB Printer(non-GDI/CAPT)
USB Printer cable
One 802.11b/g Access Point (optional)
Hardware Installation
1.
Turn off the printer's power.
2.
Connect the print server to your printer with the supplied printer cable. The
following image is the classic infrastructure topology for reference:
3.
Turn the printer's power on.
4.
Plug the AC power adapter into the power connector on the print server.
5.
Wait 40 seconds as part of the print server's Power On Self Test (POST).
Factory Default Settings
Username: admin
Password: 0000
Wireless Mode: Ad-Hoc (Peer-to-Peer)
Channel: 1
SSID: WLAN-PS
IP Address: 192.168.0.10
Subnet Mask: 255.255.255.0
1
Advertisement
Table of Contents
Related Manuals for TP-Link WPS510U
Summary of Contents for TP-Link WPS510U
-
Page 1: Factory Default Settings
Before you start, you should prepare the following items Windows 2000/XP/2003/Vista computer with print server setup CD USB Printer(non-GDI/CAPT) USB Printer cable One 802.11b/g Access Point (optional) Hardware Installation Turn off the printer’s power. Connect the print server to your printer with the supplied printer cable. The following image is the classic infrastructure topology for reference: Turn the printer’s power on. - Page 2 Assign a static IP address to your wireless adapter Assign address 192.168.0.101 to your wireless adapter, subnet mask 255.255.255.0. Please refer to T1 in Troubleshooting guide on page 13 if you need assistant Connect to the print server Click the icon and select Connect to a network Click Refresh Select WLAN-PS...
-
Page 3: Select The Print Server
Insert the provided CD into your computer’s CD dirve, the Setup Wizard will automatically pop up on your computer’s screen. Select TL-WPS510U If you don’t have a CD-ROM, you can log onto our website Note http://www.tplink.com/support/download.asp to download the setup wizard PrintServer_Setup_Wizard. -
Page 4: Configure The Print Server
On the Select A Print Server screen, TL-WPS510U will be detected as “1P_PrintServXXX”. Select the print server Click Next Configure the Print Server Please select Yes. The default password is 0000 Click Next Communication Type: Infrastructure SSID: the SSID of your wireless... - Page 5 Configure the Wireless Security according to your Wireless Router or Access Point Click Next Assign a static IP address to your Print Server. The IP address should be within the same subnet of your Wireless Router or Access Point Click Next The IP address of the print server must be within the same subnet with your Note Wireless Router or Access Point, for example:...
- Page 6 Then it will prompt you to confirm the settings. Pleas click Next to continue. PSWizard is saving the configurations to the print server Click Next This page will display when the configurations are saved to the Print Server. Since you have changed the IP address of your Print Server, you may lose the connection with the Print Server.
- Page 7 Rebuild the connection with the Print Server Reconfigure the IP address of your wireless adapter. Select Obtain an IP address automatically Select Obtain an DNS server address automatically Click OK If your computer is not able to obtain an IP address automatically, please Note assign a static IP address to your wireless adapter.
- Page 8 Now come back to the Select A Printer page finish left configurations. If your printer has already appeared in the Printer Name list, please follow the instruction Otherwise please follow the instruction Select an existing printer by the printer name Click Next, and then follow the step by step instructions to complete the installation...
- Page 9 Click Add New Printer Click Next Select Local printer attached to this computer Click Next...
- Page 10 Select Use the following port and select LPT1: (Recommended Printer Port) from the pull-down list Click Next Select the manufacturer and model of your printer Click Next If you already have the printer’s driver installed on your computer, you will be Note asked whether to keep or replace it.
- Page 11 Select No Click Next Click Next, and then follow the step by step instructions to complete the installation You have now installed the print server and the printer successfully. You can print through the wireless network. The print server needs to be configured only once, other users who want to Note share the printer only need to install the driver of the printer and configure the TCP/IP port on their computers.
- Page 12 T1. How can I assign a static IP address to the wireless adapter? For Windows XP: On the Windows taskbar, click the Start_>Control Panel, then select and double-click Network Connections. Right click Wireless Connection, and click Properties. . This dialog box will display. Click Properties Select Use the following IP address and enter the...
- Page 13 For Windows Vista: On the Windows taskbar, click the Start_>Control Panel, then select and double-click Network and Sharing Center. Click Manage network connections. This page will display. Right click Wireless Network Connection Click Properties Select Internet Protocal Version 4(TCP/IPv4) Click Properties Select following IP address enter...
-
Page 14: Technical Support
Global Australia & New Zealand Tel: +86 755 26504400 Tel: AU 1300 87 5465 E-mail : support@tp-link.com NZ 0800 87 5465 Service time:24hrs, 7days a week E-mail: support@tp-link.com.au Service time: Monday to Friday 9:00 AM to 9:00 PM AEST...