Honda VFR1200X/XD Manual page 85

Engine Oil Changing Clutch Oil Filter
u
3. Install the new clutch oil filter with the
rubber seal facing in, toward the engine.
You will see "IN-SIDE" mark on the
clutch oil filter body, near the seal.
4. Replace the O-ring and apply a thin coat
of engine oil to the new O-ring when
before installing it.
5. Install the spring and the clutch oil filter
cover.
6. Install the clutch oil filter bolts A, B and
tighten.
7. Apply a thin coat of engine oil to the
rubber seal of a new engine oil filter.
P. 81
2
8. Install a new engine oil filter and tighten.
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
84
9. Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m).
10. Fill the crankcase with the recommended
oil ( P. 68) and install the oil fill cap.
2
Required oil
When changing oil, engine oil
filter & clutch oil filter:
4.2 US qt (4.0 litres)
11. Check the oil level.
12. Check that there are no oil leaks.
13. Install the right engine heat guard and
right under fairing.
P. 79
2