Honda VFR1200X/XD Manual page 115

Tire Puncture
u
9. Install the left brake caliper and tighten
the mounting bolts.
Torque: 23 lbf·ft (31 N·m, 3.2 kgf·m).
Take care to prevent the brake caliper
u
from scratching the wheel during
installation.
Use new mounting bolts when
u
installing the brake caliper.
NOTICE
When installing the brake caliper into position on the
fork leg, carefully fit the brake disc between the pads
to avoid scratching them.
10. Lower the front wheel on the ground.
11. Apply the brake lever and brake pedal
several times. Then, pump the fork
several times.
114
Removing Wheels
12. Retighten the left axle pinch bolts.
Torque: 16 lbf·ft (22 N·m, 2.2 kgf·m).
13. Raise the front wheel off the ground
again, and check that the wheel rotates
freely after you release the brake.
14. Remove the protective tape or cloth.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.