Honda VFR1200X/XD Manual page 30

Gear position indicator
VFR1200X/XA
The gear position is shown in the gear position indicator.
VFR1200XD/XDA
The gear position is shown in the gear position indicator when the D, S mode or MT MODE
are selected.
"-" appears for a few seconds and then goes off when the engine starts.
u
"-" flashes when the engine stop switch position is changed from
u
with the ignition switch on.
"-" flashes when the ignition switch is turned on with the engine stop switch
u
The indicator may flash if:
The front wheel leaves the ground.
u
You turn the wheel while the motorcycle is upright on the stand.
u
This is normal. To operate the system again, turn the ignition switch off, then on again.
If the "-" indicator is blinking in the gear position window while riding:
S indicator
VFR1200XD/XDA
Comes on when the S mode is selected in the AT MODE.
(P48)
D indicator
VFR1200XD/XDA
Comes on when the D mode is selected in the AT MODE.
(P48)
(Run) to (Off) position
(Off) position.
(P108)
29