Appendix A: Faq - TP-Link TL-WR1043ND User Manual

Appendix A: FAQ

1. How do I configure the Router to access Internet by ADSL users?
1) First, configure the ADSL Modem configured in RFC1483 bridge model.
2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The
telephone cord plugs into the Line port of the ADSL Modem.
3) Log in to the Router, click the "Network" menu on the left of your browser, and click
"WAN" submenu. On the WAN page, select "PPPoE" for WAN Connection Type. Type
user name in the "User Name" field and password in the "Password" field, finish by
clicking Connect.
4) If your ADSL lease is in "pay-according-time" mode, select "Connect on Demand" or
"Connect Manually" for Internet connection mode. Type an appropriate number for "Max
Idle Time" to avoid wasting paid time. Otherwise, you can select "Auto-connecting" for
Internet connection mode.
Note:
i. Sometimes the connection cannot be disconnected although you specify a time to
Max Idle Time, since some applications is visiting the Internet continually in the
background.
ii. If you are a Cable user, please configure the Router following the above steps.
2. How do I configure the Router to access Internet by Ethernet users?
TL-WR1043N/TL-WR1043ND
Figure A-1 PPPoE Connection Type
Figure A-2 PPPoE Connection Mode
- 95 -
Wireless N Gigabit Router