By Pin - TP-Link TL-WR1043ND User Manual

II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my Router
Step 1: Keep the default QSS Status as Enabled and click the Add device button in Figure 4-2,
then the following screen will appear.
Step 2: Choose "Enter the new device's PIN" and enter the PIN code of the wireless adapter in
the field after PIN as shown in the figure above. Then click Connect.
Note:
The PIN code of the adapter is always displayed on the QSS configuration screen
Step 3: For the configuration of the wireless adapter, please choose "Enter a PIN into my
access point or a registrar" in the configuration utility of the QSS as below, and click
TL-WR1043N/TL-WR1043ND
The QSS Configuration Screen of Wireless Adapter
- 22 -
Wireless N Gigabit Router