Chapter 2. Hardware Installation Guide; The Front Panel; Led Explanation; The Back Panel - TP-Link TD-W8910G User Manual

Chapter 2. Hardware Installation Guide

2.1 The Front Panel

The Router's LEDs are located on the front panel.
The LED indicators on the front panel include the Power, System, ADSL, WLAN and 1-4 (LAN).
The ADSL, WLAN and 1-4 (LAN) indicators monitor link status and activity (Link/Act).

2.2 LED Explanation

Name
Power
System
Flashing
ADSL
Slow flash
Quick flash The LINE port is sending or receiving ADSL data
WLAN
Slow flash
Quick flash Sending or receiving data over wireless network
1-4
(LAN)
Flashing

2.3 The Back Panel

The Router's ports, where the cables are connected, and RESET button are located on the back
panel.
TD-W8910G
Figure 2-1
Status
Off No Power
On Power on
Off The Router has an error
On The Router is initializing
The Router is working properly
Off The LINE port is disconnected
On The LINE port has connected to ISP's network
Self detecting when power up
Off The Wireless function is disabled
The Wireless function is enabled
Off There is no device linked to the corresponding port
On Connected to a device through the corresponding port
Sending or receiving data over corresponding port
54M Wireless ADSL2+ Router User Guide
Indication
3