TP-Link TL-R480T+ User Manual page 58

Destination IP Address - The "Destination IP Address" is the address of the network or host
that you want to assign to a static route.
Subnet Mask - The "Subnet Mask" determines which portion of an IP address is the network
portion, and which portion is the host portion.
Default Gateway - This is the IP address of the gateway device that allows for contact be-
tween the router and the network or host.
Status - This field displays the status, Enabled means the rule is effective, Disabled means
the rule is ineffective.
To add/modify a static routing entry:
Step 1: Click Add New.../Modify shown in Figure 4-41, you will see a new screen shown in
Figure 4-42.
Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and
then select the status.
Step 3: Click Save to make the entry take effect.
Note:
If you want to add more than one static route, please go to step 1 to continue.
Other configurations for the entries as shown in Figure 4-31:
Click the Delete button to delete the entry.
TL-R480T+ Dual-WAN SMB Broadband Router User Guide
Figure 4-41
Figure 4-42
52