TP-Link TL-R480T+ User Manual page 53

MAC Address - .This is the PC'S MAC address which is controlled by the rule, its format of is
XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0E-AE-B0-00-0B.
Description - This is the description about the PC, Fox example: John's PC.
Status - This field displays the status, Enabled means the rule is effective, Disabled means
the rule is ineffective.
To add or modify a Domain Filtering entry:
Fox example: If you want to block the PCs with MAC addresses 00-0A-EB-00-07-BE and
00-0A-EB-00-07-5F to access the Internet, you can configure as follows.
Step 1: Enable the "Firewall" and "MAC Address Filtering" on the Firewall screen (show in
Figure 4-30). And then specify the Default MAC Address Filtering Rule "Deny these PCs
with enabled rules to access the Internet".
Step 2: Click Add New.../Modify shown in Figure 4-37, you will see a new screen shown in
Figure 4-38.
Step 3: Enter the appropriate MAC address and descriptions, then select the status as shown in
Figure 4-38.
TL-R480T+ Dual-WAN SMB Broadband Router User Guide
Figure 4-37
47