Wan Speed Detect - TP-Link TL-R480T+ User Manual

Packets
Total
Bytes
Packets
Bytes
Current
ICMP Tx
UDP Tx
TCP SYN
Tx
Note:
1) If the Current Statistics Status function is disabled, the DoS protection in Advanced
Security will be ineffective.
2) Select the Auto-refresh, then the traffic information will be refreshed automatically dur-
ing the Packets Statistics Interval. Click the Refresh button to refresh the information in
the table immediately.
Click the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.
Click the Reset All button to recount again.
Click the Delete All button to delete all the number.

4.13.10 WAN Speed Detect

Choose menu "System Tools→WAN Speed Detect", you can detect the wan speed of the router
in the screen below. There are three detecting ways: ICMP DETECT, TCP DETECT, UDP DE-
TECT. The detect way is the router sends datagram to destination IP address, and then counts
the interval between sending the datagram and receiving the response.
TL-R480T+ Dual-WAN SMB Broadband Router User Guide
The total amount of packets received and transmitted by the router
The total amount of bytes received and transmitted by the router
The total amount of packets received and transmitted in the last "Packets
Statistic interval" seconds
The total amount of bytes received and transmitted in the last "Packets
Statistic interval" seconds
The total amount of the ICMP packets transmitted to WAN in the last
"Packets Statistic interval" seconds
The total amount of the UDP packets transmitted to WAN in the last
"Packets Statistic interval" seconds
The total amount of the TCP SYN packets transmitted to WAN in the last
"Packets Statistic interval" seconds
72