TP-Link TL-R480T+ User Manual page 17

Note:
The router supports three popular ways to connect to Internet. Please select one compatible with
your ISP. If you are given another way not listed here, refer to Network→ WAN for detailed list.
Step 3: If you choose PPPoE, you will see the screen as shown in Figure 3-10. Enter the
Username and Password provided by your ISP. These fields are case sensitive. If you
have difficulty with this process, please contact your ISP.
Step 4: If you choose Dynamic IP in Figure 3-9, the router will automatically receive the IP pa-
rameters from your ISP without needing to enter any parameters.
Step 5: If you Choose Static IP, you should enter the detailed IP information in Figure 3-11.
Click the Next button
Step 6: After that, you will see the next screen. Click Finish to complete the quick installation.
TL-R480T+ Dual-WAN SMB Broadband Router User Guide
Figure 3-10
Figure 3-11
Figure 3-12
11