ETC OneTrack Backbone I-coupler Housing Installation Manual

ETC Installation Guide
OneTrack Backbone I-coupler Housing
Overview
OneTrack Backbone I-coupler Housing is an enclosure for the
OneTrack I-coupler when used with OneTrack Backbone. The I-
coupler Housing is only available with a pull box.
Separate installation and wiring instructions are provided with the
I-coupler. For information on planning a complete OneTrack
system, see the OneTrack by ETC and OneTrack Backbone System
Planning and Installation Manual available for download at
etcconnect.com/OneTrack.
Installation
Tools required: #2 Phillips screwdriver, 15 mm socket wrench, and 8 mm socket wrench for
knockout (if feeding power or data to the coupler)
1. Remove the side panels of the I-coupler
Housing. Retain the side panels and
hardware for later reattachment.
2. Slide the I-coupler Housing into the
OneTrack Backbone.
Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
Global Offices n London, UK | Rome, IT | Holzkirchen, DE | Paris, FR | Hong Kong | Dubai, UAE | Singapore
New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX | © 2023 Electronic Theatre Controls, Inc.
Web
Trademark and patent info:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7076M2150 Rev A Released 2023-06
etcconnect.com | Support support.etcconnect.com
etcconnect.com/ip
Slide coupler
housing into
Backbone
| Contact etcconnect.com/contactETC
| Third-party license agreement info: etcconnect.com/licenses
OneTrack
Backbone
I-coupler
Housing
Remove
side panels