ETC Installation Guide
OneTrack Backbone T-coupler Housing
Overview
OneTrack Backbone T-coupler Housing is an
enclosure for the OneTrack T-coupler when used
with OneTrack Backbone. The T-coupler Housing is
available with or without a pull box. Although the
images show the T-coupler Housing without the pull
box, the installation steps are the same for both
models.
Separate installation and wiring instructions are
provided with the T-coupler. For information on
planning a complete OneTrack system, see the
OneTrack by ETC and OneTrack Backbone System
Planning and Installation Manual available for
download at etcconnect.com/OneTrack.
Installation
Tools required: #2 Phillips screwdriver, 15 mm socket wrench, and 8 mm socket wrench for
knockout (if feeding power or data to the coupler)
1. Remove the side panels of the T-coupler
Housing. Retain the side panels and
hardware for later reattachment.
2. Slide the T-coupler Housing into the
OneTrack Backbone.
Corporate Headquarters n Middleton, WI, USA | +1 608 831 4116
Global Offices n London, UK | Rome, IT | Holzkirchen, DE | Paris, FR | Hong Kong | Dubai, UAE | Singapore
New York, NY | Orlando, FL | Los Angeles, CA | Austin, TX | © 2023 Electronic Theatre Controls, Inc.
Web
Trademark and patent info:
Product information and specifications subject to change. ETC intends this document to be provided in its entirety.
7076M2110 Rev A Released 2023-06
etcconnect.com
| Support
support.etcconnect.com
etcconnect.com/ip
OneTrack Backbone
T-coupler Housing
OneTrack Backbone
T-coupler Housing
with Pull Box
Slide coupler housing
into Backbone
| Contact
etcconnect.com/contactETC
| Third-party license agreement
info: etcconnect.com/licenses
Remove side panels