Replacement - Sharp KI-L80TA Operation Manual

PLASMACLUSTER ION
GENERATING UNIT
START/STOP
( Electrode Section )
1. Remove the Unit Cover, and pull out
the Unit Holder.
Unit Cleaning
Brush
2. Remove dusts from the Electrode
Section.
Unit Cleaning Brush
Electrode
Before
cleaning
Around the base
3. Insert the Unit Holder in the product,
and install the Unit Cover.
CAUTION
• Do not clean with anything other than the Unit
Cleaning Brush. Doing so could lead to failures in
the Unit.
• A bent electrode could be cut off and dropped
during the cleaning process, but it will not change
the performance.
• Do not touch the electrode directly. Doing so could
lead to pain / itching.
• Do not transform the Electrode Section. Doing so
can damage it.
• Do not touch the Connection Terminals. Doing so
can damage them.
After cleaning
Electrode
Click
Connection Terminals

REPLACEMENT

START/STOP FILTERS
LIFE OF FILTERS
Filter life varies depending on the room environment,
usage conditions, and location of the product.
Lifespan of HEPA filter and Deodorizing filter and
replacement suggestions are based on purifying
a room in which 5 cigarettes are smoked per day
and the product's dust collection and deodorizing
performance has declined to half the level of a new
filter.
We recommend replacing the filter more frequently
if the product is used in conditions significantly more
severe (PM2.5 etc.,) than a normal household.
• HEPA Filter
• Deodorizing Filter : About 10 years after opening
• Humidifying Filter : About 10 years after opening
Replacement Filter Model
Consult your dealer when purchasing a replacement
filter.
HEPA Filter (1 unit)
FZ-G75HFE
Deodorizing Filter (1 unit)
FZ-G60DFE
Humidifying Filter (1 unit)
FZ-J1XMFE
* Do not dispose the
Filter Frame.
Disposing of filters
Dispose of used filters according to local laws and
regulations.
HEPA Filter material:
• Polypropylene • Polyethylene
Deodorizing Filter material:
• Paper
Humidifying Filter material:
• Polyester
EN-16
: About 10 years after opening
Humidifying
Filter
Filter Frame
• ABS resin
• Rayon