Sharp KI-L80TA Operation Manual page 35

HUMIDIFYING FILTER / HUMIDIFYING TRAY
1. Remove the
Humidifying
Filter and Tray.
2. Rinse with plenty of water.
• Do not remove the Float and the
Rollers. If they come off, refer to
below.
3. Attach the Humidifying
Filter and Tray.
• After maintenance, correctly
reattach the parts.
NOTE How to clean hard to remove dirt.
Kitchen detergent
(only Humidifying tray)
1. Fill the tray half-way with
water.
1
2. Add a small amount of
kitchen detergent.
2
Soak for 30
minutes.
3
NOTE How to install the Float and the Rollers
Float
3. Insert the tab on the other
side of the float into the
hole.
2. Insert the tab of the float
into the hole.
Citric acid
(available at some drugstores)
2 1/2 cups of water
Rinse off the kitchen detergent or the descaling solution with clean water.
1. Insert the Float under
this tab.
Float
Tray Panel
100% bottled lemon juice
3 cups of water
3 teaspoons
Soak for 30 minutes.
(When using lemon juice as your
descaling solution, allow for more
soak time.)
Tab
Cross-Section view
EN-13
Float
Roller
with no pulp
1/4 cup
Roller
Click
Click