Cleaning - Silvercrest SAS 7.4 LI C2 Operating Instructions Manual

Cleaning

To achieve the best results, empty the dirt container q and clean the dust filter 0
after every use .
CAUTION! MATERIAL DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents . These could
damage the outer surfaces of the appliance .
1) To open the dirt container q, press the release button 8 and remove the
dirt container q .
2) Remove the dust filter 0 from the dirt container q .
3) Empty the dirt container q .
4) Pull the dust filter bag 9 with its holder out of the dust filter 0 .
5) Rinse the dust filter bag 9 out in cold water and wait until it is completely
dry before reinserting it into the dust filter 0 . Do not dry it with hot air .
6) Reinsert the dust filter 0 into the dirt container q . When doing so, ensure
that the dust filter 0 is seated squarely and that the rubber lip seals the dirt
container q .
7) Replace the dirt container q on the motor unit again:
–
Push the plastic tab on the underside of the handheld vacuum cleaner
into the recess on the dirt container q .
–
Press the release button 8 and push the dirt container q onto the motor
unit at the same time .
–
Let go of the release button 8 so that the restraint engages in the recess .
The dirt container q is now firmly seated on the motor unit .
8) Clean the housing and both nozzles with a lightly moistened cloth . For stubborn
soiling use a mild detergent on the cloth .
9) Dry all parts thoroughly before using the appliance again or storing it .
SAS 7.4 LI C2 GB │ MT │ 39 ■