Light switch (01_06)
When the light switch «E» is set to «1», the low-beam light is on. When set to «2», the
high-beam light is activated. Push the button «F» and the high-beam light is flashed.
01_06
Start-up button (01_07)
To start the engine, pull either brake lever and press the button «N».
01_07
Engine stop button (01_08)
The engine can be started when the emergency cut-off switch «H» is set to «1»
RUN; if the emergency cut-off switch «H» is set to «0» OFF , the engine cannot be
started or it shuts off if already running.
01_08
13