Before First Use - Electrolux GA60GLISCN User Manual

Hide thumbs Also See for GA60GLISCN:
Table of Contents

Advertisement

Available languages

Available languages

AirDry is automatically activated with all
programmes other than
The duration of the drying phase and the door
opening time vary depending on the selected
programme and options.
When AirDry opens the door, the display
shows the remaining time of the running
programme.
CAUTION!
Do not try to close the appliance door
within 2 minutes after automatic opening.
This can cause damage to the appliance.
If, afterwards, the door is closed for at
least 3 minutes, the running programme
ends.
CAUTION!
If children have access to the appliance,
we advise to deactivate AirDry. The
automatic opening of the door may pose
a danger.

8. BEFORE FIRST USE

1. Make sure that the current level of the
water softener agrees with the
hardness of the water supply. If not,
adjust the level of the water softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any
processing residuals that can still be
inside the appliance. Do not use
detergent and do not put dishes in the
baskets.
After starting the programme, the appliance
recharges the resin in the water softener for
up to 5 minutes. The washing phase starts
only after this procedure is complete. The
procedure is repeated periodically.
8.1 The salt container
CAUTION!
Use only regeneration salt for
dishwashers. Do not use kitchen salt.
14
ENGLISH
(if applicable).
How to deactivate AirDry
Make sure the appliance is in user mode.
1. Press
.
• The indicator
• The remaining indicators are off.
• The display shows the current setting:
= AirDry is deactivated.
= AirDry is activated.
2. Press
to change the setting.
3. Press the on/off button to confirm the
setting.
The salt is used to recharge the resin in the
water softener and to assure good washing
results in daily use.
How to fill the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
2. Put 1 litre of water in the salt container
(only for the first time).
3. Fill the salt container with dishwasher salt
(until it is full).
still flashes.

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Ga60glissp

Table of Contents