Function Setting; Indoor Unit - Fujitsu AS G07KMTA Series Service Instruction

3-1. FUNCTION SETTING

3-1-1 INDOOR UNIT

Remote controller address setting
* Because this setting is normally done automatically when 2-wire-type wired remote controller
is installed, setting is unnecessary.
Multiple indoor units can be operated by using one wired remote controller.
Set the unit number of each indoor unit.
Function
Setting Value
Number
00
*When connecting Polar 3-core wired remote controller, set the remote controller address
in the order of 0, 1, 2, ......, and 15.
*When cdifferent type of indoor units (such as wall-mounted type and cassette type, cassette
type and duct type, or other combinations) are connected using group control system, some
functions may no longer be available.
Filter sign
Select appropriate intervals for displaying the filter sign on the indoor unit according to the
estimated amount of dust in the air of the room.
If the indication is not required, select "No indication" (03).
Function Number
11
setting Description
00
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Setting Value
Setting Description
00 Standard
Long interval (1,000 hours)
01
02 Short interval (200 hours)
03 No indication
03-01
Unit no.0
Unit no.1
Unit no.2
Unit no.3
Unit no.4
Unit no.5
Unit no.6
Unit no.7
Unit no.8
Unit no.9
Unit no.10
Unit no.11
Unit no.12
Unit no.13
Unit no.14
Unit no.15
Factory setting
(400 hours)
Factory
setting