Control Board (2) Code 5.602.168 - Cebora POWER SPOT 5600 Service Manual

CEBORA S.p.A.

5.4 - Control board (2) code 5.602.168.

5.4.1 - Topographical drawing.
5.4.2 - Connector table.
Connector Terminals
CN1 1
CN1 2
CN1 3
CN1 4
CN1 5
CN1 6
CN1 7
CN1 8
CN2 1-2
CN2 3
CN2 4
CN2 5
CN2 6
CN2 7
CN2 8
CN2 9
CN2 10
CN2 11
CN2 12-13-14
3.302.311
Function
shared input for signals from outside.
temperature signal input from thermostat on transformer (31).
start signal input from gun button.
NU.
NU.
NU. (accessory connected recognition signal input).
NU.
earth connection.
+5 Vdc input for control board (2) power supply.
scr (3) engage command output.
charge command output for triac TR1.
discharge command output for discharge resistor (7).
RL1 command output (mains voltage selection).
mains voltage signal input.
mains synchronism signal input.
scr (3) engage enable signal output.
DC-capacitors (24) voltage signal input for alarm E3 threshold.
DC-capacitors (24) voltage signal input to adjust dc voltage.
0 Vdc input for control board (2) power supply.
23
23/01/2015