Cebora POWER SPOT 5600 Service Manual page 22

CEBORA S.p.A.
5.3.2 - Connector table.
Connector Terminals
CN1 1
CN1 2 - 3
CN2 1(+) – 2(-)
CN2 3
CN2 4
CN2 5(+) – 6(-)
CN3 1 - 2
CN3 3
CN3 4 - 5
CN3 6
CN3 7 - 9
CN3 8 - 10
CN4 1-2
CN4 3
CN4 4
CN4 5
CN4 6
CN4 7
CN4 8
CN4 9
CN4 10
CN4 11
CN4 12-13-14
3.302.311
Function
input earth connection.
mains power supply input (115 / 230 Vac).
scr (3) gate command output.
NU.
output voltage signal input.
voltage output for discharge resistor (7).
190 Vac voltage input for power circuit power supply.
NU.
18 Vac voltage input for services power supply.
NU.
115 Vac voltage output for primary winding 1 of transformer (31) power
supply.
115 Vac voltage output for primary winding 2 of transformer (31) power
supply.
+5 Vdc output for control board (2) power supply.
engage command input for scr (3).
charge command input for triac TR1.
discharge command input for discharge resistor (7).
RL1 command input (mains voltage selection).
mains voltage signal output.
mains synchronism signal output.
scr (3) engage enable signal output.
DC-capacitors (24) voltage signal output for alarm threshold E3.
DC-capacitors (24) voltage signal output to adjust dc voltage.
0 Vdc output for control board (2) power supply.
22
23/01/2015