Table of Contents
Advertisement
Loading the Silverware Basket
CAUTION
Load sharp items (knives, skewers, etc.)
pointing down.
Failure to do so may result in injury.
Features and appearance of racks and silverware
basket may vary from your model.
Load the silverware basket while it is in the
bottom rack or take the basket out for loading on
a counter or table.
In some models small items like baby bottle caps,
jar lids, corn cob holders, etc., can be placed in
a covered section. Close the cover to hold small
items in place.
Use suggested loading patterns, as shown, to
increase washability of the silverware.
•
Be sure nothing protrudes through bottom of
basket or rack to block the spray arm.
•
Do not mix silver and stainless to avoid
damaging the silver finish
PREPARING AND LOADING DISHES
Mix items in each section of the basket with some
pointing up and some down to avoid nesting.
Water spray cannot reach nested items.
Adding an article
To add or remove items after wash cycle starts:
•
Unlatch door and wait a few seconds until
wash action stops before opening.
•
Add the item and wait a few seconds to allow
cold air to slowly expand inside dishwasher.
•
To resume cycle press the START/CANCEL
pad and close the door immediately.
Loading the Cutlery Tray
The Cutlery Tray is designed for flatware and
most cooking or serving utensils. Heavily soiled
utensils or items with baked on foods should be
placed in the upper rack or silverware basket for
best washing performance. The separators on the
cutlery tray help keep flatware separated to avoid
damage and improve cleaning.
NOTE
Load cutlery as suggested with cutlery
handles placed inwards to optimize cleaning
performance.
11
Advertisement
Table of Contents
