Checking The Mower Adjustment - Toro 77281TA Setup Instructions

10
Checking the Mower
Adjustment
No Parts Required
Procedure
Adjust the side-to-side level and the front-to-rear blade
slope. Use the relevant procedures in the Operator's
Manual to verify that the deck is level, and make any
adjustments as needed.
11
Checking the Machine Before Delivery to the Customer
(All Machines)
No Parts Required
Procedure
Before delivering the machine to the customer, ensure that you have performed the procedures listed in the
following table and initial each when finished. Refer to the Operator's Manual for instructions on performing
these procedures.
Initial
When you finish setting up the machine, sign and date in the space provided below:
Signature:
Check the tire pressure.
Check the level of the mower deck.
Check the engine-oil level.
Check the hydraulic-fluid level.
Check that the ROPS is secure.
Check the adjustment of the parking brake.
Ensure that the machine tracks correctly; refer to the Operator's Manual for the adjustment procedure.
Check the safety-interlock systems and ensure that they are all functioning properly; refer to the Operator's
Manual.
Ensure that the PTO works.
Check all fasteners that you installed to ensure that they are tight.
Check Procedure
Date:
6