Maintenance; Two Year Warranty - Genesis GMT35T Operator's Manual

GROUT REMOVAL (FIG 10)
use a grout removal blade to remove damaged or cracked
grout, or in order to replace a damaged or broken tile.
to remove the grout, use a back and forth motion, making
several passes along the grout line. be careful not to apply
too much side pressure on the grout blade.
CLEANING
avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
fluids, gasoline, petroleum-based products, penetrating
oils, etc., come in contact with plastic parts. Chemicals
can damage, weaken or destroy plastic which may
result in serious personal injury.
this product is warranted free from defects in material and workmanship for 2 years after date of purchase. this limited
warranty does not cover normal wear and tear or damage from neglect or accident. the original purchaser is covered by
this warranty and it is not transferable. Prior to returning your tool to store location of purchase, please call our toll-free
help line for possible solutions.
THIS PRODUCT IS NOT WARRANTED IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
for questions about this or any other genesis™ Product, please call toll-free:
www.genesispowertools.com
or visit our web site:
APPLICATIONS & ACCESSORIES

MAINTENANCE

Do not at any time let brake
TWO-YEAR WARRANTY
TOLL-FREE HELP LINE
©richpower industries, inc. All rights reserved
Printed in China, on recycled paper
electric tools used on fiberglass material, wallboard,
spackling compounds, or plaster are subject to accelerated
wear and possible premature failure because the
fiberglass chips and grindings are highly abrasive to
bearings, brushes, commutators, etc. Consequently, we
do not recommended using this tool for extended work on
these types of materials. however, if you do work with any
of these materials, it is extremely important to clean the
tool using compressed air.
LUBRICATION
this tool is permanently lubricated at the factory and
requires no additional lubrication.
richpower industries, inc.
736 hampton road
williamston, sC 29697
ENGLISH
888-552-8665
FIG 10
.