Web Application
FEATURES
The network module web application can be used to configure and monitor the AVT . Access the web
application by typing the network module IP address in a supported browser .
FIRST LOGIN
1.
2.
Figure 1. REFUSED CONNECTION EXAMPLE
3.
Figure 2. CERTIFICATE WARNING
1006819, B21176_EN_rev3
Type the network module IP address (default: 192 .168 .2 .10) in a supported browser using HTTPS and not
HTTP .
Supported browsers: Chrome, Edge, Firefox
If the Browser displays "refused to connect" please double check that you are using "https://" protocol
and not "http://"
By Default, the Web Interface uses a self-signed certificate . Until a CA signed certificate / key is installed,
browsers will display a security error . In Chrome browser, click advanced .
2
06/19/2023