Specifications - Shoprider EXPLORER 888SE User Manual

SPECIFICATIONS

Note: All dimensions shown are nominal
- Overall: 1280mm (L) x 600mm (W) x 1070mm (H at lowest settings)
- Seat: 460 - 530mm (W int.) x 445mm (D) x 650mm / 680mm / 695mm / 710mm / 725mm (H)
- Backrest: 460mm (W) x 500mm (H) x 0 - 100° (Angle range)
- Headrest: 255mm (W) x 180mm (H) x 630 to 750mm (H from seat - 7 settings at 20mm increments)
- Armrests: 300mm (L) x 85mm (W) x 240 to 315mm (H from seat- 4 settings at 25mm increments)
0 - 90° (Angle range)
- Tiller: 460mm (W) x 900mm (H) x 30° forwards to 15° towards seat (Angle range)
- Turning Circle: 1500mm
- Speed: 10km/h
- Maximum range: Up to 32km*
- Safe climb angle: 9 °
- Maximum climb angle: 9°
- Motor: 0.75Hp high torque motor (2 pole)
- Batteries: 2 x 24V / 50 Amp (supplied)
- Charger: 8 Amp (Supplied)
- Tyres (Pneumatic): Front / Rear: Ø260 x 85mm (10")
- Product Weight: 99kg
- Maximum User Weight: 136kg (on flat ground)
* Maximum range is based on an ambient temperate of 20°C, 75kg user, brand new
fully charged battery and constant driving speed of 5km/h on flat level ground.
Please contact your supplier or SHOPRIDER Mobility if you require any
further information on the EXPLORER Mobility Scooter.
3.
shoprider.com.au
ASK FOR THE BRAND