Table of Contents
Advertisement
Message
is lit up in the
temperature display and
an alarm is also
sounding.
Possible cause and remedy
The temperature alarm has been activated; the
temperature in the freezer section has risen higher or
fallen lower than the temperature set.
Possible reasons for this include:
– The appliance door has been opened too
frequently.
– A large quantity of fresh food has been placed
in the freezer without switching on the
SuperFreeze function.
– A prolonged power cut (mains outage) has
occurred.
– The appliance has a fault.
Touch OK.
The alarm message is confirmed:
the alarm stops.
The warmest temperature recorded in the
refrigeration appliance will flash for about 1 minute in
the display. Then the temperature display will change
to the current temperature.
You can exit the flashing temperature display early:
Touch OK.
The warmest temperature displayed will disappear.
The display will revert to showing the current
temperature in the freezer.
Rectify the cause of the alarm.
Depending on the temperature displayed, you
should check whether food in the freezer has
started to thaw or has defrosted. Defrosted food
may only be refrozen after it has been cooked.
Problem solving guide
goes out and
63
Advertisement
Table of Contents
