Table of Contents
Advertisement
Video Settings – Main Assist Functions
[
]
[ZEBRA1]
[ZEBRA2]
[ZEBRA1+2]
[OFF]
[SET]
When [BASE/RANGE] Was Selected with [SET]
Centered on the brightness set with [Base Level], parts with the brightness
in the range set in [Range] are displayed with the stripes.
[Base Level] can be set in the range between 0 % and 109 % (IRE).
≥
[Range] can be set in the range between ±1 % and ±10 % (IRE).
≥
•
When [Photo Style] is set to [V-Log] or when a LUT file has not been applied in
[REAL TIME LUT], this is measured with "Stop" units.
(Calculated as "0 Stop"=42 % (IRE))
•
[ZEBRA1+2] cannot be selected while you are setting [BASE/RANGE].
[
]
Select [Zebra Pattern]
Parts that are brighter than the base value are displayed with
[ZEBRA1] stripes.
Parts that are brighter than the base value are displayed with
[ZEBRA2] stripes.
Both [ZEBRA1] and [ZEBRA2] are displayed.
Sets the base brightness.
[Zebra 1]
[Zebra 2]
—
[50%] to [105%]/[BASE/RANGE]
[50%] to [105%]/[BASE/RANGE]
416
Advertisement
Table of Contents
