Table of Contents
Advertisement
Flash – Setting Flash
[Flash Synchro]
When a moving subject is recorded at night using a slow shutter and flash,
a trail of light may appear in front of the subject.
If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a
trail of light appearing behind the subject by firing the flash immediately
before the shutter closes.
[
]
[1ST]
This is the normal method for recording with the Flash.
[2ND]
The light source appears behind the subject and the picture becomes dynamic.
•
When [2ND] is set, [2nd] is displayed on the flash icon of the recording screen.
•
When the following functions are being used, the setting is fixed to [1ST]:
– [Wireless]
– [Live View Composite]
•
The effect may not be adequately achieved at faster shutter speeds.
[
]
Select [Flash Synchro]
351
Advertisement
Table of Contents
