Table of Contents
Advertisement
Materials – Cautions for Use
Lens
•
When using this lens, take care not to drop, bump, or apply undue force to it.
Doing so may cause malfunction or damage to this lens and the digital
camera.
•
Do not aim the lens at the sun or strong light sources.
The concentrated light may cause fire or damage.
•
Do not allow strong light beams, such as laser light, to be directly exposed to this
camera (lens). These can destroy the image sensor and cause the camera to
malfunction.
•
Images may be affected by dust, dirt, and soiling (water, oil, fingerprints, etc.) on the
lens surface.
Before and after recording, use a blower to blow off dust and dirt from the surface of
the lens, then lightly wipe with a soft dry cloth to remove soiling.
•
When the camera is not being used, attach the lens cap and lens rear cap to prevent
dust and dirt from adhering to or entering the camera.
•
To protect the lens contact points (A), do not do the following.
These may cause a malfunction.
– Touch the lens contact points.
– Soil the lens contact points.
– Place the lens with its mount surface facing down.
•
To improve the dust and splash resistant performance of the interchangeable lens
(H-ES12060/H-FS12060), a lens mount rubber is used in the mount.
– The lens mount rubber will leave scuff marks on the digital camera mount, but this
does not impact performance.
– To replace the lens mount rubber, contact Panasonic.
(A)
758
Advertisement
Table of Contents
