Important Information - Rinnai INFINITY 26 Smartstart Operation & Installation Manual

The Rinnai INFINITY 26 Smartstart is INCOMPATIBLE with solar water heating
systems. A dedicated range of solar compatible continuous flow water heaters is
NOTE
available from Rinnai. This appliance is factory pre-set to a temperature limit of
50°C or 55°C. Other limits, lower or higher are available on request.
Always check water temperature carefully before
use. Refer to the WARNING ABOUT HOT WATER
on "page 1" of this manual for important safety
information.
Do Not touch the unit cover or the flue outlet.
Do Not insert objects into the flue outlet.
On colder days steam may discharged from the flue
outlet. This condition is normal for high efficiency
appliances and does not indicate a fault.
Turn Water Off
Turn Gas Off
Drain Water
Heating
Loop Return
Anti-frost protection is fitted as standard equipment
on this model. When the power is connected and
switched on, freezing will be prevented.
If the power is switched off and freezing conditions
are expected, turn off water and gas and drain all
water from the appliance.
Rinnai Australia

IMPORTANT INFORMATION

HOT!
Filter
Drain
Gas
Valve
Filter
Hot Cold Gas
At low water flows, the hot water unit may extinguish
without warning. Opening the tap further will restart
the appliance.
Keep flammable materials,
containers, pool chemicals, trees, shrubs, etc. well
clear of the flue outlet.
Do Not spray water directly into the flue terminal.
43°C
The delivered water temperature is controlled
automatically. The flow may vary depending on the
delivery temperature selected and the ambient water
temperature.
3
OFF!
spray cans, fuel
Operation Manual