System Health Monitor - Supermicro X6DAL-XG User Manual

X6DAL-XG User's Manual
USB 2.0 Controller Mode
This setting allows you to configure USB 2.0 Controller Mode. The options
are Hi-Speed (480 Mbps) or Full Speed-12Mbps.

System Health Monitor

This feature allows the AMI BIOS to automatically display the status of the
following items:
System Health Function
Select "Enabled" to enable the function of Hardware Health Monitoring
Device. The options are "Enabled" and "Disabled."
CPU Temperature
The feature allows the user to set the CPU temperature threshold. The
o o o
options range from 65 C to 90 C. The default setting is " 78 C. (*Note below.)
If System Health Function is enabled, the BIOS will automatically display the
status of the following items:
CPU1 Temperature, CPU2 Temperature, System Temperature
Note: In the Windows OS environment, the Supero Doctor III settings take
precedence over the BIOS settings. When first installed, the SD III adopts
the temperature threshold settings previously set in the BIOS. Any subse-
quent changes to these thresholds must be made within Supero Doctor,
since the SDIII settings override the BIOS settings. For the Windows OS to
adopt the BIOS temperature threshold settings, please change the SDIII set-
tings to be the same as those set in the BIOS.
4-18